My Carrollwood garage floor is peeling. Can you recoat it?

Yes — that's a lot of what we do here. Many Carrollwood homes are from the 1960s through the 1990s and have a first-generation coating that has started to peel or lift with hot-tire pickup. We diamond-grind the old coating off down to bare concrete, repair the cracks underneath, and put down a new flake, metallic, or polyaspartic system that's built to bond and last this time.

What finishes work in an established Carrollwood home?

Anything from a clean solid-color or flake garage floor to a hand-troweled metallic in a living space. We bring physical samples so you can see the finish under your own lighting before anything is poured, and we match it to the home.

How much does epoxy flooring cost in Carrollwood?

Decorative flake systems generally run about $5.50 to $6.50 per square foot installed; hand-troweled metallic finishes run roughly $9 to $14, and polyaspartic systems $6 to $12. Recoats that need extra grinding or crack repair are quoted after an on-site assessment. You get a written, line-item quote — we don't hide pricing.

My Carrollwood slab is decades old. Will moisture be a problem?

It can be, which is exactly why we test — and it's usually why the first coating failed. An aging on-grade slab and the Tampa Bay area's high water table push moisture vapor up through the concrete, and a new floor will delaminate if it's poured over an untested slab. We run an ASTM moisture test before we quote and add a vapor-barrier primer when the readings call for it.

Epoxy Flooring Carrollwood, FL — Recoats, Repairs & New Floors on Older Slabs

Garage recoats, crack repair, and decorative epoxy floors for Carrollwood's established homes. We grind out failed coatings and hot-tire pickup, moisture-test every aging slab, and back it with a written warranty.

Get a Free Quote (813) 694-5986

Serving Hillsborough County

HOA-Friendly Process

Written Warranty

Licensed & Insured

Epoxy Floors Built for Carrollwood's Established Homes & Aging Slabs

Carrollwood is one of northwest Tampa's most established, mature neighborhoods — Original Carrollwood around the lakes, the deed-restricted homes of Carrollwood Village, and the tree-lined streets off Dale Mabry Highway and Gunn Highway. Most homes here were built between the 1960s and the 1990s, which means the slabs are decades old. We see a lot of failed first-generation garage coatings, hot-tire pickup, and surface cracking, so much of our Carrollwood work is restoration: grinding off a peeling old floor, repairing the cracks underneath, and putting down a flake, metallic, or polyaspartic system that's built to last this time.

Older slabs need more attention, not less. A 40-year-old Carrollwood garage slab often has thin or aged vapor barriers, settlement cracks, and a previous coating that never bonded right — all of which we diagnose before we quote. We diamond-grind to bare concrete, fill and reinforce cracks, and match the finish to the home, from a clean solid-color garage to a decorative metallic in a living space. See our residential epoxy options and repair & recoat services.

Behind every Carrollwood floor is the same engineering discipline. The Tampa Bay area's high water table pushes moisture vapor up through aging on-grade slabs, and that's the number-one reason an old coating let go in the first place. We run an ASTM moisture test before we quote, add a vapor-barrier primer when the readings demand it, and grind for a permanent bond — the difference between a floor that lasts two years and one that lasts twenty. Explore everything we do on the Ascent Epoxy Tampa home page.

Get a Free Carrollwood Quote

Established, mature neighborhoodOriginal Carrollwood and Carrollwood Village homes from the 1960s–1990s sit on decades-old slabs — recoats, crack repair, and moisture mitigation are the core of what we do here.

Recoats & hot-tire pickupWe grind off failed first-generation coatings and lift hot-tire pickup back to bare concrete, then put down a system that bonds for good — not over a floor that's already letting go.

High water table on old slabsAging on-grade Carrollwood slabs move moisture, and that's why the first coating failed. We ASTM-test first and add a vapor barrier before any new finish goes down.

Crack repair & lanaisSettlement cracks in older slabs get filled and reinforced, and UV-stable polyaspartic topcoats hold up on lanais and pool decks through Florida sun and storm season.

We also serve: Brandon Riverview Wesley Chapel Westchase Lutz Land O' Lakes All service areas →

Hand-troweled metallic epoxy floor in a Carrollwood home

Every Carrollwood project starts with an on-site slab assessment, a moisture test, and a written quote — before any deposit.

Free

On-Site Carrollwood Consultation

We come to your home, assess the old slab and any failed coating, and lay out flake and metallic samples under your own lighting. You leave with a written, line-item quote — no phone pricing.

Restored

Recoats & Crack Repair

We grind off failed first-generation coatings and hot-tire pickup, fill and reinforce settlement cracks, then put down a system that bonds for good.

Designer

Finishes That Match the Home

From a clean solid-color garage to a hand-troweled metallic in a living space, we match the finish to your home and phase low-odor cures so it stays livable.

Tested

Moisture-First Prep

ASTM moisture testing on every slab, with a vapor-barrier primer when the high water table calls for it — usually the reason an aging Carrollwood floor failed in the first place.

Written

Warranty You Can Read

One page, plain English, naming what's covered: peeling, delamination, hot-tire pickup. No asterisks pointing to clauses that void the whole thing.

Direct

One Point of Contact

One number from quote through warranty — the same team coordinating your install end to end. No call-center handoffs.

Call Now Free Quote